24v dc motor with no load speed 13500rpm,used for vending machine motor

1.24V DC brush motor used for air pumps and water pumps.
2.High torque,long life,small dissipation.
3.Fast delivery.

The models we list below are part of our existing designs. we can customized them after evaluation if you can specify your own needs like voltage, speed, torque front shaft length and so on. 

 

Model No.	RS-365SH-14132
Rated voltage	24v dc
No Load	Speed(RPM)	13500
	Current(A)	0.12
At Max Efficiency	Speed(RPM)	10943
	Current(A)	0.51
	Torque(mNm)	7.1
	Output(W)	8.09
	Eff.(%)	65.6
At stall	Torque(mNm)	37.3
	Current(A)	2.2

 

 

Unit Conversion: 1g.cm≈0.098mN.m≈0.014oz.in   1mm=0.039in   1g=0.035oz

 

 

 

Model No.	Main Performance
	Rated Voltage	No Load		At Maximum Efficiency					At Stall
		Speed	Current	Speed	Current	Torque	Output	Eff.	Current	Torque
	V	r/min	A	r/min	A	g.cm	W	%	A	g.cm
RS-365SH-1882	30.0 CONST	26,000	0.28	21,694	1.41	115.9	25.83	61.1	7.1	700

 

Damper actuator motorAutomotive air conditioner motor370 motorDimension: dia. 24.4 x 30.8 L. shaft O.D. 2.0 mmBasic Structure: SECD housing / SECC end cap / Rubber MagnetApplication: Damper actuator / Gear boxWeight: Approx. 50g

 

 

Basic Structure of Chengfang Motors 2-pole statorSr ferrite permanent magnet3, 5, 7, 8, 9, 12,16  slots armatureSilicon-steel lamination with epoxy coatingHigh-carbon steel shaftCu-Ag alloy commutatorCopper-graphite brushesBe-Cu leaf-brush commutating systemSECD round / flat type housingSECD end cap / glassfiber reinforced PA6/6 end capCylinder / self-aligning Cu-Fe alloy sintered bushes155oC (class F) magnet wire ↓ ↓ ↓ ↓ ↓

Customerized Options Leadwires with connector / pinsEMI suppression componentsPTC or thermostate protectionBuilt-in AC/DC rectifierBuilt-in cooling fanMultiple output shaft     diamond knurls, straight knurls, D-cut, stepped shaftShaft-mounted gears, essentric gears, belt pulleysStainless steel (SS304, SS420) shaftBall bearingCage-brush commutating systemPrecious metal brush / commutatorHall encoderLow-cogging torque design180oC (class H), 200oC (class C) magnet wire-40oC ~ 220oC bearing lubricantNeodymium magnets